AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mold paint

Product General Information:

Commercial Terms of Products:

Description:

· Anti-Mould Paint & Sealer

· Prevents mould & mildew regrowth

· Covers oil, grease & mould stains before repainting

· Mould protection for walls & ceilings

· Covers most paintwork stains, and helps prevent them from reappearing

AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint is formulated to cover most types of stains, grease, pen marks, rust, crayons, soot, and dry water stains on interior walls and ceilings, and keeps walls and ceilings mould-free. It dries quickly to a semigloss white finish that can be painted over.

Applications:

PREPARATION: Ensure the surface to be treated is clean, dry, and free from loose debris, mould, grease, oil, wax, dirt, and moisture, etc. Mask surrounding areas to protect from overspray. Fill holes or cracks with filler and sand down. Ensure the AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint is at room temperature before use. Do not apply in temperatures below 10°C. ALWAYS use in a well-ventilated area.

IMPORTANT: Do not shake the can in an up-and-down direction. For best results, shake AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint in a side-to-side 'whisking' motion for at least 2 minutes before spraying and whilst in use to prevent clogging.

Spray AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint upright, evenly over the affected area from a distance of 20-30cm until the stain is covered. Apply 2-3 coats, leaving at least 15 minutes to dry between coats. Touch dry after approx 2 hours, but leave doors and windows open to avoid build-up of further condensation for 24 hours. Additional cost may be required. Reapply when the previous coat is fully dry.

CLEAN UP: Clean any overspray with mineral turps or general-purpose thinners. For better long-term storage, turn the can upside down and spray until no paint is coming out.

Specifications:

FAQ:

Q1: What is the recommended spraying distance?

A: Hold the can 20-30 cm away from the surface while spraying.

Q2: What surface preparation is required before application?

A: Ensure the surface is clean, dry, and free from loose debris, mould, grease, oil, wax, and dirt. Fill holes or cracks with filler and sand down.

Q3: Does AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint prevent mould growth?

A: Yes, its formula prevents mould from growing again on treated walls and ceilings.

Q4: What is the final effect of this spray paint?

A: It produces a semi-gloss white finish after drying.

Q5: What types of stains can AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint cover?

A: It can cover oil stains, grease marks, pen marks, rust, crayon marks, cigarette ash, and dried water stains on interior walls and ceilings.

Q6: Can other paints be applied over this product after it dries?

A: Yes, other paints can be applied over it after it is completely dry.

Q7: How long after painting can the surface be exposed to moisture?

A: Please open doors and windows for 24 hours to prevent condensation and ensure the paint fully cures.

Q8: How do I clean up splatter?

A: Clean up splatter with mineral oil or general-purpose thinner.

Q9: Can it effectively cover water stains?

A: Yes, AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint can cover dried water stains on interior walls and ceilings.

Q10: How should it be stored long-term?

A: After use, back spray until no more paint is sprayed out, then store properly.

Q11: What payment methods are available?

A: We accept FOB, CFR, and EXW payment methods.

Q12: How are the products shipped?

A: By specialized dangerous goods container shipping.

Q13: Do I need to mask the surrounding area before spraying?

A: Yes, please mask the surrounding area to prevent overspraying.

Q14: Where is the AEROPAK factory?

A: Guangdong Province, China

Q15: How is AEROPAK Wall Renew Spray Paint Stain Block Covering Stains and Preventing Mould paint packaged for shipping?

A: It is packaged 12 cans per carton.

Q16: Does it require ventilation during use?

A: Yes, please ensure it is used in a well-ventilated area.

Q17: What certifications does this product hold?

A: It is certified with REACH, ROHS, SGS, SDS, and ISO9001.

Q18: How many coats should I apply?

A: Apply 2-3 coats, allowing at least 15 minutes of drying time between each coat.

Q19: What is the minimum order quantity?

A: The minimum order quantity is 7,500 pieces.

Q20: How long is the typical delivery time?

A: Delivery: About 45 days after receipt of T/T deposit and confirmed artwork (if any).

Factory

Aerosol products belong to dangerous goods UN1950, IMO2.2; such dangerous goods are generally difficult to arrange transportation. Most freight forwarders fail to transport dangerous goods in accordance with the relevant standards, so goods are vulnerable to customs inspection and detention at the port of loading and discharge.

Our freight forwarders have more than 13 years of experience in handling dangerous goods, and we will strictly abide by the relevant transportation conditions to ensure that your goods are safe and fast during transportation and smooth customs clearance. We can save valuable time and money for our customers.

Our company

Shenzhen i-Like Fine Chemical Co., Ltd, a family enterprise of I-Like Holdings Group, which was started in 1997, has been a leader in the design, manufacture and marketing of aerosol products and sealants. Our aerosol products include Spray Paints, Car Care Products, tyre care and repair, and industrial-purpose products.

Exhibitions

We have actively participated in a diverse range of international fairs and shows over the years. Each year, we are regular attendees at the 2X Canton Fair, which is a significant platform for global trade. Additionally, we have a strong presence at renowned automotive exhibitions such as Automechanika Shanghai and Automechanika Frankfurt.

We also engage with AAPEX USA, a premier event in the automotive aftermarket. The EISENWARENMESSE Fair Cologne in Germany is another important event on our calendar, allowing us to showcase our products and connect with a wide array of industry professionals and potential customers from around the world.