AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray

Product General Information:

Commercial Terms of Products:

Description:

·Anti-Corrosive

·Ideal for damaged galvanized steel.

·Anti-Corrosive - prevents rust on welded, galvanized and raw steel

·Spray on Zinc protection prevent rust on welded, galvanized & raw steel

·Provides sacrificial Zinc protection and prevents rust on welded and raw steel

AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray is a fast drying, high performance coating designed to protect welded and raw steel against corrosion.

AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray is ideal to touch up, protect and seal welded joints on metal surfaces and provides sacrificial Zinc protection suitable on all types of steel and provides exceptional long term protection against rust and corrosion.

Applications:

PREARATION: For best results, remove all traces of rust by wire brushing or mechanical sander. Clean surface of Grease,Oil, Dust and Flaking Paint.

IMPORTANT: Shake the can vigorously for two minutes before use. Holding the can 15-30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Then pause, allow the coat to dry for 10mins at 25°C. Then apply additional coats for full protection.

Specifications:

FAQ:

Q1: What is the main purpose of AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray?

A: It is designed to prevent rust and corrosion on welded, galvanized, and raw steel surfaces through sacrificial zinc protection.

Q2: How does sacrificial zinc protection work?

A: The zinc-rich coating corrodes preferentially to the steel substrate, actively protecting the metal even when scratched or damaged.

Q3: What types of steel is AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray suitable for?

A: It is compatible with all types of steel, including welded joints, galvanized surfaces, and raw steel.

Q4: Can AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray be used to repair damaged galvanized coatings?

A: Yes, it is ideal for touching up, protecting, and sealing welded joints and damaged galvanized surfaces.

Q5: How should the surface be prepared before application?

A: Remove all traces of rust using a wire brush or mechanical sander. Clean the surface thoroughly of grease, oil, dust, and flaking paint.

Q6: How long should I shake the can before use?

A: Shake the can vigorously for two minutes before spraying to ensure proper mixing of the zinc particles.

Q7: What is the recommended spraying distance?

A: Hold the can 15–30 cm from the prepared surface for optimal application.

Q8: What is the application technique for best results?

A: Apply one light mist coat in a continuous motion from left to right. Allow the coat to dry for 10 minutes at 25°C, then apply additional coats for full protection.

Q9: How many coats are typically needed for full protection?

A: Multiple coats are recommended for complete coverage and maximum corrosion resistance.

Q10: How long should I wait between coats?

A: Allow 10 minutes drying time between coats at room temperature (25°C).

Q11: What is the recommended film thickness per coat?

A: For optimal protection, apply each coat at approximately 20–30 μm thickness.

Q12: Is AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray fast-drying?

A: Yes, it features a fast-drying formula for efficient application and reduced downtime.

Q13: Can AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray be used on cut edges and drilled holes?

A: Yes, it is ideal for corrosion prevention on cut edges, drilled holes, and bare metal surfaces during manufacturing or installation.

Q14: How should the can be stored between uses?

A: Store upright in a cool, dry place away from direct sunlight, heat sources, and open flames.

Q15: What is the shelf life of AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray ?

A: It has a shelf life of 3 years when stored properly in a cool, dry place.

Q16: What certifications does AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray hold?

A: It complies with REACH, ROHS, SGS, SDS, and ISO9001 standards.

Q17: Is this product resistant to weather and environmental exposure?

A: Yes, it offers exceptional weather resistance and long-term anti-corrosion performance in harsh environments.

Q18: What are the available payment terms?

A: We accept FOB, CFR, and EXW payment terms.

Q19: What is the typical delivery time?

A: Delivery takes approximately 45 days after receipt of T/T deposit and confirmed artwork.

Q20: How is AEROPAK Cold High Zinc Galvanizing Spray Anti-rust Zinc Spray Paint Cold Galvanizing Compound Spray shipped?

A: It is shipped via professional hazardous materials container shipping in compliance with international regulations.

Q21: Can this product be applied to outdoor steel structures?

A: Yes, it provides excellent long-term anti-corrosion protection for outdoor applications such as fences, guardrails, lamp posts, and transmission towers.

Q22: Is this product suitable for use on pipelines and equipment?

A: Yes, it is commonly used for touch-up and repair of damaged galvanized coatings on steel structures, pipelines, and industrial equipment.

Q23: Does the product contain glass balls for mixing?

A: Yes, the can contains glass balls to help mix the zinc particles evenly during shaking.

Q24: Can this coating be topcoated with other paints?

A: Yes, once fully cured, it provides a suitable base for most industrial topcoats.

Factory

Aerosol products belong to dangerous goods UN1950, IMO2.2, such dangerous goods are generally difficult to arrange transportation. Most freight forwarders fail to transport dangerous goods in accordance with the relevant standards, so goods are vulnerable to customs inspection and detention at the port of loading and discharge.

Our freight forwarders have more than 13 years of experience in handling dangerous goods, and we will strictly abide by the relevant transportation conditions to ensure that your goods are safe and fast during transportation and smooth customs clearance. We can save valuable time and money for our customers.

Our company

Shenzhen i-Like Fine Chemical Co., Ltd, a family enterprise of I-Like Holdings Group, which was started in 1997, has been a leader in the design, manufacture and marketing of aerosol products and sealants. Our aerosol products include Spray Paints, Car Care Products, tyre care and repair, and industrial-purpose products.

Exhibitions

We have actively participated in a diverse range of international fairs and shows over the years. Each year, we are regular attendees at the 2X Canton Fair, which is a significant platform for global trade. Additionally, we have a strong presence at renowned automotive exhibitions such as Automechanika Shanghai and Automechanika Frankfurt.

We also engage with AAPEX USA, a premier event in the automotive aftermarket. The EISENWARENMESSE Fair Cologne in Germany is another important event on our calendar, allowing us to showcase our products and connect with a wide array of industry professionals and potential customers from around the world.