AEROPAK China manufacturer rtv silicone gasket maker

AEROPAK Red RTV Silicone Gasket Maker

AEROPAK Red RTV Silicone Gasket Maker is for high temperature applications up to 343 degress: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.

AEROPAK Black RTV Silicone Gasket Maker

AEROPAK Black RTV Silicone Gasket Maker is for high temperature applications up to 260 degress: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.

AEROPAK Yellow RTV Silicone Gasket Maker

AEROPAK Yellow RTV Silicone Gasket Maker is for high temperature applications up to 371 degress: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.

AEROPAK Blue RTV Silicone Gasket Maker

AEROPAK Blue RTV Silicone Gasket Maker is for high temperature applications up to 260 degress: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.

AEROPAK Grey RTV Silicone Gasket Maker

AEROPAK Grey RTV Silicone Gasket Maker is for high temperature applications up to 343 degress: safe for oxygen sensor equipped vehicles. Excellent heat control and torque retention for overhead cam and timing chain covers.Dries tough, flexible and improves high temperature performance. Resists most engine fluids.

Package:

85g/pc;  blistercard;
12sets/box, 12 boxes/carton
350 cartons/20ft container
Carton Size: 420x405x440mm

Directions

1.Clean the surface to get rid of the rust, oil, or any dirty.

2.Cut the cap point, twists the cap mouth, cut at 45 degree angle beveling according to need.

3.In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth.

4.If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.

5.After completely solidify, amend the glue by knife.

Precautions

1,Operation should be carried out in well ventilated area.

2,Keep out of the reach of children; Non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.

3,When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.

4,After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.

5,This product should be operated at temperature 5-40°C,relative humidity 40-80%.

AEROPAK Brand  have been introduced and well accepted in about 68 countries and regions. Our export markets cover countries in North and South America, Southeast Asia, the Middle East, South Africa, as well as in Europe. As international expansion is our main concern, we sincerely invite your esteemed company to promote our AEROPAK brand in your markets and share the benefits together. Upon interest, please contact us.

Shenzhen I-Like Fine Chemical Co., Ltd, wholly-owned subsidiary of I-like  Industries Group,

has been a leader in manufacturing and marketing of Car Care Products, Spray Paints, Tyre Puncture Repairs, Marking Paints, Spray Adhesives, Air Dusters, etc.  Our products have been exported to more than 68 countries and regions, including US and EU, and our main markets are: EU, South American, South Africa, Australia, Middle East and Asian countries. We have now more than 10 sole agency in the world who are distributing our AEROPAK brand or CAPTAIN brand. 

Covering the area of 20,000 m2, our factory is equipped with advanced facilities for production and development, supported by the top experts of development and production with the degree of Doctors, Masters and Bachelors in China. We adopt advanced manufacturing technique and pass the certificate of ISO9001. So far, in production, we possess well-equipped manufacturing workshop with full and semi-automatic imported production lines, production capability of 150,000pcs/day. A space of 5 full-automatic lines is reserved for the future development. 

  Car Care Products                                             Spray Paints       

                      Tire Repairs                                              Lubricants Spray

               Industrial uses                                         Silicone Sealant 

Learn More